Level U-Head, Universal Jack

Solid-steel 24″ threaded rod welded to base plate at a right angle. Allows for individual adjustment of each leg in a stationary position on relatively level surfaces. Cold-dip zinc galvanized.

Caster U-Head, Universal Jack

Solid-steel 22″ threaded rod welded to a female reciever that accept either our scaffolding caster wheels or our base plates. Allows for individual adjustment of each leg in conjunction with a scaffolding caster wheel allowing your scaffold to roll on uneven surfaces. Can additionally be converted to a level jack when used with a base plate in place of the caster wheel. Cold-dip zinc galvanized. See our video at the bottom of the page for more information on the benefits of scaffolding jacks.

Swivel U-Head, Universal Jack

Solid-steel 24″ threaded rod welded to a huge T. Reciever welded to base plate accept the T on the end of the threaded rod, allowing base plate to swivel. Allows for individual adjustment of each leg and on surfaces with too high a degree of incline for a level jack.

Scaffold Base Plate

Scaffold Base Plate is a foot plate for scaffold systems of Ringlock Scaffolding,Kwikstage Scaffolding,Cuplock Scaffolding, Scaffolding Frames,Tube and Clamp Scaffold.

There are Spigot Base Plate and Socket Base Plate. Spigot Base Plate is used to be Inserted into the bottom end of the Scaffold Pole(Standards).

Socket Base Plate is used to as Socket of Universal U-Head, Universal Jacks, Scaffold Poles.

Base Plate is Mainly Used to Spread The Load Onto The Sole Plates.

According to Aramco Construction Safety, All Scaffold Posts(Standards) shall be pitched on steel base plates at least 150mm(6 inch) x150mm(6 inch) and 6mm thick.